Spoa10
Spoa10

Rotary Lift – 2 Post Car Lift – Asymmetrical Design – 10,000 lb. Lifting Capacity

$3,925.00

The Rotary Lift SPOA10 has a true asymmetrical design, with columns capable of rotating 30º. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column.

The Rotary Lift SPOA10 has dual controls with 110V electric and air outlets right on the lift make this two-post lift the ultimate choice for productivity seeking technicians and managers.

For decades, Rotary Lift has been the recognized as one of the leader in vehicle service lifts. This legendary reputation has set the standard for quality, durability, reliability and attention to safety throughout the automotive service market. With Rotary lift, you have the service and support you need. Our world-wide network of service companies are always standing by.

SKU: SPOA10 Categories: , ,

Product Description

Unlike most other lifts, Rotary Lifts power units are designed and built by for Rotary lifts. We don’t use 3rd party power units which are for universal applications. Adjustable height option on two-post column extensions gives you flexibility during installation to maximize the vehicles you can service with each lift. The patented “Double S” (US Patent No. 5,009,287) single piece construction column design provides a channel for the bearings to travel that maximizes the strength of the column and surface contact area of the bearing. Slider block bearings of Tivar? 1000 polyethylene are self-lubricating and maintenance free.

Arm restraints make positioning of arms easy. They engage when the lift is raised and automatically disengage when the lift is fully lowered. High-pressure cylinders in each column provide maximum lifting force and smooth operation. Overhead padded switch bar to prevent damaging a vehicle from being raised too high. Standard three-position flip-up adapters allow for quick and easy contact with pickup points on a variety of vehicles. We offer the highest standard adapter reach in the industry, often avoiding the need for additional adapters. Low profile arm design on all 10,000 lbs. capacity models (4 from floor to flip-up adapter min. height) accommodate more vehicles.

Three-Stage/Front and Two-Stage/Rear arms:

The three-stage arm increases overall arm sweep and minimum arm reach to precisely lift vehicles that have:

  • Uni-body construction
  • Visually marked pick-up points on the vehicle
  • Wider wheelbase and lower profile
  • A short or long wheelbase

FEATURES

  • 10,000 lbs. lifting capacity
  • True asymmetric, with columns at rotated 30º.  This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column
  • “Double S” column design with single piece construction provides a channel for the bearings to travel in, maximizing the strength of the column and surface contact area of the bearing
  • Single point lock release which releases the locks at the same time
  • Two full stroke cylinders, one in each column
  • Arm restraints on each arm engage when the vehicle is lifted
  • Third party certified

OPTIONS

  • Extended height
  • inbay® (A10i) models include: Up/Down, lock controls on each column with air and electric outlets
  • 3-stage arms for greater extension and retraction

SPECIFICATIONS

  • Lifting Capacity: 10,000 lbs.
  • Motor / Voltage: 2 HP / 208v-230v
  • Time of Full Rise: 45 seconds
  • Ceiling Height Required:
    • 12′ (3658mm)
    • 12′ 9″ (3886mm)
    • 13’9″ (4191mm)
  • Max Load (per arm): 2,500 lbs. (1134kg)
  • Min. Bay Size: 12′ x 24′ (3658 x 7315mm)
  • Rise: 781/4″ (1981mm) 811/4″ (2064mm)
  • Height Overall (standard):
    • 11′ 81/2″ (3569mm)
    • 12′ 81/2″ (3873mm)
    • 13′ 81/2″ (4178mm)
  • Width Overall: 11′ 51/2″ (3493mm)
  • Drive-Thru Clearance: 951/4″ (2416mm)
  • Floor to Overhead Switch: 11′ 23/4″ (3423mm)
  • Reach (front arm min.): 201/2″ (521mm)
  • Reach (front arm max.): 403/4″ (1036mm)
  • Reach (rear arm min.): 401/4″ (1019mm)
  • Reach (rear arm max.): 61″ (1548mm)
  • Min. Adapter Height: 43/4″ (121mm)
  • Low Step Height: 7″ (178mm)
  • High Step Height: 101/4″ (260mm)
  • Inside Columns: 1071/4″ (2727mm)
  • Cylinder Height (full rise):
    • 11′ 103/4″ (3626mm)
    • 12′ 43/4″ (3778mm)

Contact Us About This Product

Product Contact Form
First
Last
Sending

No Payments for 90 days

We offer No Payments for 90 Days, subject to a credit approval.Download Financing ApplicationFill Out Our Online Form